GigaCore supported SNMP OIDs (Gen 1 and Gen 2)
This article describes the OID's supported by the GigaCores that return relevant info.
- SNMP must be enabled on the GigaCore switches, either via Arano, or the WebUI, as it is disabled by default.- GigaCores use SNMP V1 and V2c.- The default community name is "Public", this can not be changed at the moment.- Values can only be read via SNMP (GET), it is not possible to set any values.- Some OID's return a table of data, some just single values or strings.- This is not an exclusive list, other OID's might also return info that might be relevant for certain applications.- The LUMINEX-MIB-GC fil and fastpath MIBs are attached to this KB article.
GigaCore Gen2 supported OID's
https://support.luminex.be/portal/en/kb/articles/gigacore-generation-2-devices
POE
OID .1.3.6.1.4.1.4413.1.1.15.1.1
MIB BROADCOM-POWER-ETHERNET-MIB (fastpath_power_ethernet.my)
Returns : agentPethPsePortTable
containing : Information about the switches POEstatus, like output current and voltage
agentPethPowerLimit,agentPethOutputPower,agentPethOutputCurrent,agentPethOutputVolts,agentPethTemperature,agentPethPowerLimitType,agentPethHighPowerEnable,
agentPethPowerDetectionType,agentPethFaultStatus,agentPethPortReset,agentPethPowerLimitMin,agentPethPowerLimitMax,agentPethHighPowerMode,agentPethPowerClassifications,Index Value
OID .1.3.6.1.2.1.105.1.1
MIB POWER-ETHERNET-MIB
Returns : pethPsePortTable
containing : Information about the switches POE PORTstatus, enabled/disabled , delivering or searching, priority and class
pethPsePortGroupIndex,pethPsePortIndex,pethPsePortAdminEnable,pethPsePortPowerPairsControlAbility,pethPsePortPowerPairs,pethPsePortDetectionStatus,pethPsePortPowerPriority
,pethPsePortMPSAbsentCounter,pethPsePortType,pethPsePortPowerClassifications,pethPsePortInvalidSignatureCounter,
pethPsePortPowerDeniedCounter,pethPsePortOverLoadCounter,pethPsePortShortCounter,Index Value
OID .1.3.6.1.2.1.105.1.3.1
MIB POWER-ETHERNET-MIB
Returns : pethMainPseTable
containing : Information about the switches available POE power.
pethMainPsePower contains the available power in Watts , pethMainPseConsumptionPower contains the power reservation or actual consumption in milliWatts and the alarm threshold in %
pethMainPseGroupIndex,pethMainPsePower,pethMainPseOperStatus,pethMainPseConsumptionPower,pethMainPseUsageThreshold,pethMainPseFWImageVersion,Index Value
SFP modules
OID .1.3.6.1.4.1.4413.1.1.43.1.18
MIB FASTPATH-BOXSERVICES-PRIVATE-MIB
Returns : boxServicesFiberPortsOpticsTable
containing : Information about the switches SFP's (temperature, current, voltage, input power and output power)
boxServicesFiberPortOpticsTemperature,boxServicesFiberPortOpticsVoltage,boxServicesFiberPortOpticsCurrent,boxServicesFiberPortOpticsPowerOut,boxServicesFiberPortOpticsPowerIn,
boxServicesFiberPortOpticsTxFault,boxServicesFiberPortOpticsLos,boxServicesFiberPortOpticsFaultStatus,Index Value
OID .1.3.6.1.4.1.4413.1.1.43.1.19
MIB FASTPATH-BOXSERVICES-PRIVATE-MIB
Returns : boxServicesFiberPortsOpticsInfoTable
containing : Information about the switches SFP's (vendor Name, Serial Number, Part Number, Nominal Bitrate, Speed)
boxServicesFiberPortsOpticsInfoPortIndex,boxServicesFiberPortsOpticsInfoVendorName,boxServicesFiberPortsOpticsInfoLinkLength50um,
boxServicesFiberPortsOpticsInfoLinkLength62dot5um,boxServicesFiberPortsOpticsInfoSerialNumber,boxServicesFiberPortsOpticsInfoPartNumber,boxServicesFiberPortsOpticsInfoNominalBitRate,
boxServicesFiberPortsOpticsInfoRevision,boxServicesFiberPortsOpticsInfoCompliance,Index Value
System Info
OID .1.3.6.1.4.1.4413.1.1.1.1.1.X
MIB FASTPATH-SWITCHING-MIB
Group agentInventoryGroup
Returns : info about the CPU model, Machine Type, Firmware version and Serial Number (example of Gigacore 20t)
| .1.3.6.1.4.1.4413.1.1.1.1.1.2 | agentInventorySysDescription.0 | GigaCore20t, v1.5.1, Linux 5.4.2 |
| .1.3.6.1.4.1.4413.1.1.1.1.1.3 | agentInventoryMachineType.0 | GigaCore20t |
| .1.3.6.1.4.1.4413.1.1.1.1.1.4 | agentInventoryMachineModel.0 | GigaCore20t |
| .1.3.6.1.4.1.4413.1.1.1.1.1.5 | agentInventorySerialNumber.0 | LUM080PRO0016 |
| .1.3.6.1.4.1.4413.1.1.1.1.1.6 | agentInventoryMaintenanceLevel.0 | A |
| .1.3.6.1.4.1.4413.1.1.1.1.1.7 | agentInventoryPartNumber.0 | BCM56160 |
| .1.3.6.1.4.1.4413.1.1.1.1.1.8 | agentInventoryManufacturer.0 | 0xbc00 |
| .1.3.6.1.4.1.4413.1.1.1.1.1.9 | agentInventoryBurnedInMacAddress.0 | D0-69-9E-11-00-3C |
| .1.3.6.1.4.1.4413.1.1.1.1.1.10 | agentInventoryOperatingSystem.0 | Linux 5.4.2 |
| .1.3.6.1.4.1.4413.1.1.1.1.1.11 | agentInventoryNetworkProcessingDevice.0 | BCM56160_B0 |
| .1.3.6.1.4.1.4413.1.1.1.1.1.12 | agentInventoryAdditionalPackages.0 | QOS Open API |
| .1.3.6.1.4.1.4413.1.1.1.1.1.13 | agentInventorySoftwareVersion.0 | v1.5.1 |
OID .1.3.6.1.4.1.4413.1.1.1.1.4.X.X
MIB FASTPATH-SWITCHING-MIB
Group agentSwitchCpuProcessGroup
Returns : Memory and CPU usage info (example of Gigacore 20t)
| .1.3.6.1.4.1.4413.1.1.1.1.4.1.0 | agentSwitchCpuProcessMemFree.0 | 611880 |
| .1.3.6.1.4.1.4413.1.1.1.1.4.2.0 | agentSwitchCpuProcessMemAvailable.0 | 1029704 |
| .1.3.6.1.4.1.4413.1.1.1.1.4.9.0 | agentSwitchCpuProcessTotalUtilization.0 | 10 Secs ( 21.2617%) 60 Secs ( 22.656%) 300 Secs ( 22.2593%) |
| .1.3.6.1.4.1.4413.1.1.1.1.4.10.0 | agentSwitchCpuProcessMemFreePercentage.0 | 59 |
| .1.3.6.1.4.1.4413.1.1.1.1.4.11.0 | agentSwitchCpuProcessTotalUtilizationPercentage5sec.0 | ALWAYS RETURNS 0 ! |
| .1.3.6.1.4.1.4413.1.1.1.1.4.12.0 | agentSwitchCpuProcessTotalUtilizationPercentage60sec.0 | 23 |
| .1.3.6.1.4.1.4413.1.1.1.1.4.13,0 | agentSwitchCpuProcessTotalUtilizationPercentage300sec.0 | 22 |
OID ..1.3.6.1.4.1.4413.1.1.1.1.4.8
MIB FASTPATH-SWITCHING-MIB
Returns : agentSwitchCpuProcessTable
containing : Information about the processes running on the switch and CPU utilisation
agentSwitchCpuProcessIndex,agentSwitchCpuProcessName,agentSwitchCpuProcessPercentageUtilization,agentSwitchCpuProcessId,Index Value
OID .1.3.6.1.2.1.1.5.0
MIB SNMPv2-MIB
Returns : sysName
containing : switches NAME as set in the webUI or Araneo
OID . 1.3.6.1.2.1.1.3.0
MIB SNMPv2-MIB
Returns : sysUpTime
containing : switches UPTIME in timeticks
OID . 1.3.6.1.4.1.4413.1.1.43.1.8.1.5.1.0
MIB FASTPATH-BOXSERVICES-PRIVATE-MIB
Returns : boxServicesTempSensorTemperature
containing : switches CPU temperature (in degrees Celcius)
Group / Vlan Info
OID .1.3.6.1.2.1.17.7.1.1.4
MIB Q-BRIDGE-MIB (fastpath-mibs\vlan.my)
Returns : dot1qNumVlans
containing : the number of Vlans configured on the switch
OID .1.3.6.1.2.1.17.7.1.4.3
MIB Q-BRIDGE-MIB (fastpath-mibs\vlan.my)
Returns : dot1qVlanStaticTable
containing :the Vlan (Group) names, bitmasks with assigned ports and the VlanID's
dot1qVlanStaticName,dot1qVlanStaticEgressPorts,dot1qVlanForbiddenEgressPorts,dot1qVlanStaticUntaggedPorts,dot1qVlanStaticRowStatus,Index Value
OID .1.3.6.1.2.1.17.7.1.4.2
MIB Q-BRIDGE-MIB (fastpath-mibs\vlan.my)
Returns : dot1qVlanCurrentTable
containing :the Vlan (Group) ID's, bitmasks with assigned ports and creation time of the Vlan since power-up
dot1qVlanFdbId,dot1qVlanCurrentEgressPorts,dot1qVlanCurrentUntaggedPorts,dot1qVlanStatus,dot1qVlanCreationTime,Index Value
Network statistics
OID .1.3.6.1.2.1.16.1.1
MIB RMON-MIB
Returns : etherStatsTable
containing : table with ethernet statistics of the ports
etherStatsIndex,etherStatsDataSource,etherStatsDropEvents,etherStatsOctets,etherStatsPkts,etherStatsBroadcastPkts,etherStatsMulticastPkts,etherStatsCRCAlignErrors,
etherStatsUndersizePkts,etherStatsOversizePkts,etherStatsFragments,etherStatsJabbers,etherStatsCollisions,etherStatsPkts64Octets,etherStatsPkts65to127Octets,
etherStatsPkts128to255Octets,etherStatsPkts256to511Octets,etherStatsPkts512to1023Octets,etherStatsPkts1024to1518Octets,etherStatsOwner,etherStatsStatus,Index Value
OID .1.3.6.1.2.1.2.2
MIB RFC1213-MIB
Returns : ifTable
containing : table with info and ethernet statistics of the ports
ifIndex,ifDescr,ifType,ifMtu,ifSpeed,ifPhysAddress,ifAdminStatus,ifOperStatus,ifLastChange,ifInOctets,ifInUcastPkts,ifInNUcastPkts,ifInDiscards,ifInErrors,
ifInUnknownProtos,ifOutOctets,ifOutUcastPkts,ifOutNUcastPkts,ifOutDiscards,ifOutErrors,ifOutQLen,ifSpecific,Index Value
LLDP
OID .1.0.8802.1.1.2.1.4.1
MIB LLDP-MIB
Returns : lldpRemTable
containing : table with discovered LLDP devices and info
lldpRemTimeMark,lldpRemLocalPortNum,lldpRemIndex,lldpRemChassisIdSubtype,lldpRemChassisId,lldpRemPortIdSubtype,
lldpRemPortId,lldpRemPortDesc,lldpRemSysName,lldpRemSysDesc,lldpRemSysCapSupported,lldpRemSysCapEnabled,Index Value
GigaCore Gen1 supported OID's
https://support.luminex.be/portal/en/kb/articles/gigacore-generation-1-devices
Network statistics
OID .1.3.6.1.2.1.2.2
MIB RFC1213-MIB (Rmon2 MIB)
Returns : ifTable
containing : Information about the switches ports and VLans, Portstatus, and traffic.
ifIndex,ifDescr,ifType,ifMtu,ifSpeed,ifPhysAddress,ifAdminStatus,ifOperStatus,ifLastChange,ifInOctets,ifInUcastPkts,ifInNUcastPkts,ifInDiscards,ifInErrors,
ifInUnknownProtos,ifOutOctets,ifOutUcastPkts,ifOutNUcastPkts ,ifOutDiscards,ifOutErrors,ifOutQLen,ifSpecific,Index Value
LLDP Info
OID .1.0.8802.1.1.2.1.4.1
MIB lldpMIB
Returns : lldpRemTable
containing : table with discovered LLDP devices and info
lldpRemTimeMark,lldpRemLocalPortNum,lldpRemIndex,lldpRemChassisIdSubtype,lldpRemChassisId,lldpRemPortIdSubtype,lldpRemPortId,
lldpRemPortDesc,lldpRemSysName,lldpRemSysDesc,lldpRemSysCapSupported,lldpRemSysCapEnabled,Index Value
Redundant PSU info
OID .1.3.6.1.4.1.56979.2.1.1.1
MIB LUMINEX-MIB-GC
Returns : rpsuStatus
containing : the rpsu status :
0:RPSU_OK, 1:RPSU_NOT_PRESENT, 2:RPSU_ACTIVE" on Gen1 Gigacores with RPSU possibility
Example returns in Ireasoning MIB Browser
Example return of .1.3.6.1.2.1.2.2 ifTable in MIB Browser (GigaCore 20t)
Example return of .1.3.6.1.2.1.2.2 ifTable in MIB Browser (GigaCore 10)
Related Articles
Luminode SNMP MIB Details
The Luminode range of products has SNMP capabilities. Here is a list of all the OID enabled in the MIB : System information .1.3.6.1.2.1.1.1 : system description .1.3.6.1.2.1.1.2 : object ID .1.3.6.1.2.1.1.3 : Uptime .1.3.6.1.2.1.1.5 : System name ...SNMP / RMON on Gigacore switches
Gigacore switches offer SNMP based on the RMON standard (RFC 1757) You can find detailed documentation on the standard here : https://oidref.com/1.3.6.1.2.1.16 That being said, it is usually automatically detected in major software like PRTG.GigaCore API documentation
In the attached document you can find all the web API commands available for the second generation GigaCore. The API is also available on the device itself by browsing to http://{YOUR_DEVICE_IP}/api/doc This API works for the following devices: ...GigaCore Bitfocus Companion Streamdeck module
Introduction Luminex products have an open HTTP API. This API can be used to integrate with other software applications. The GigaCore API is documented here (generation 2) and here (generation 1). One such application is Bitfocus Companion, a ...What are the default credentials of a GigaCore? (Gen 1 and Gen 2)
By default, any GigaCore switch will use the following: Login: admin Password: no password, leave the field blank