Software
LumiNode DMX sync
Introduction Typically, the DMX ports on a LumiNode work on a fixed framerate. When new data is being received from the process engine, it will only be transmitted on the DMX line at the next tick of this framerate. With a framerate of 40 FPS, the ...
LumiNode/LumiCore Bitfocus Companion Streamdeck module
Introduction Luminex products have an open HTTP API. This API can be used to integrate with other software applications. The LumiNode/LumiCore API is documented here. One such application is Bitfocus Companion, a software which enables the Elgato ...
LumiNode Advanced Networking
In this article we will look at how to configure the network and advanced network options of the LumiNode. Firmware 2.3.0 or higher is required for these features. The interface has been redesigned in firmware 2.5.0. Note: It is not recommended to ...
LumiNode / LumiCore patch generator
LumiNode / LumiCore Patch Generator The LumiNode range offers the option to import csv files to fill the patch in a process engine. Attached to this article you will find an example excel spreadsheet with some handy macros to quickly make patches ...
LumiNode/LumiCore control channel values
In the LumiNode/LumiCore there are different functions where a control channel can be assigned. All values are in the range 0 - 255. These are the control channel values for each of the available options: General: 0 - 7: Do Nothing Switch: 8 - 15: ...
Luminode SNMP MIB Details
The Luminode range of products has SNMP capabilities. Here is a list of all the OID enabled in the MIB : System information .1.3.6.1.2.1.1.1 : system description .1.3.6.1.2.1.1.2 : object ID .1.3.6.1.2.1.1.3 : Uptime .1.3.6.1.2.1.1.5 : System name ...
LumiNode API documentation
In the attached document you can find all the web API commands available for the LumiNode and LumiCore. The API is also available on the device itself by browsing to http://{YOUR_DEVICE_IP}/api/doc To highlight a couple of applications that are ...
Loading csv files in custom mode
In this article we will describe the procedure for uploading csv files to the custom patch in the LumiNode range. Before you start you have to configure the process engines in the correct mode first with the sources configured as usual. In this ...
How to reset Luminode 1 and 2
Resetting a LumiNode or LumiCore can be done through various ways: - Web interface - LCD interface (if applicable) - Araneo - Luminet Monitor This guide is made for devices without LCD interface: LumiNode1, LumiNode2, LumiNode4DIN, but the same ...
Master/Limit explained
This guide is intended to explain users the way Master and Limit works in the Luminode. In order to get to this function you click on the Master/Limit icon when configuring a process engine. This opens the MASTER / LIMIT pop up window First you ...
LumiNode firmware upgrade
In this document we will explain how to upgrade the firmware on the LumiNodes. There is only ONE firmware file for ALL the models which makes it easy to start with as there won't be any confusion about having the correct file. How to get the latest ...