Hardware
Pinout for RJ45/Ethercon DMX connectors on Luminex devices
For all Luminex devices using RJ45 (or Ethercon) for DMX connectivity, the pin is in compliance with the ANSI DMX standard E1.11 see the following excerpt from the standard that specifically describe the pinout for RJ45 connectors : The Following ...
Terminal block for contact closure on Luminode
Have you lost the terminal block connector of your Luminode? The original part for the 2 pole terminal block shipped with : Luminode 2 Luminode 4 Luminode 12 Lumicore is : Wurth 691 361 300 002 ...
LumiNode LED indicators
There are various LEDs on the LumiNode. Here is a list of the LEDs, the possible colours, and the meaning of each colour: DMX Port Status Meaning DMX Input Green Blinking: Active input DMX only (output mode) Cyan Blinking: DMX activity DMX + RDM ...
Mounting the LumiNode
Depending on the model of the device there are different mounting options: LumiNode 4 LumiNode 4 is a device that can be mounted in a truss as well as in a rack. Please read the following instructions to make sure the device is mounted and secured ...