Luminode SNMP MIB Details

The Luminode range of products has SNMP capabilities.

Here is a list of all the OID enabled in the MIB :

System information

.1.3.6.1.2.1.1.1 : system description
.1.3.6.1.2.1.1.2 : object ID
.1.3.6.1.2.1.1.3 : Uptime
.1.3.6.1.2.1.1.5 : System name

Packet counters in and out
.1.3.6.1.2.1.11.1 : Packets in
.1.3.6.1.2.1.11.2 : Packets out

System Stats
.1.3.6.1.4.1.2021.11 : CPU Stats
      .1.3.6.1.4.1.2021.11.9 : percentages of user CPU time
      .1.3.6.1.4.1.2021.11.10 : percentages of system CPU time
      .1.3.6.1.4.1.2021.11.11 : percentages of idle CPU time
      .1.3.6.1.4.1.2021.11.67 : Number of CPUs

.1.3.6.1.2.1.25.1.1 : System Uptime
.1.3.6.1.2.1.25.2.1 : Storage types
.1.3.6.1.2.1.25.2.2 : Memory Size

Memory
.1.3.6.1.2.1.25.2.3.1.1.1  : Physical Memory
.1.3.6.1.2.1.25.2.3.1.1.3  : Virtual Memory
.1.3.6.1.2.1.25.2.3.1.1.6  : Memory Buffer
.1.3.6.1.2.1.25.2.3.1.1.7 : Cached Memory
.1.3.6.1.2.1.25.2.3.1.1.8 : Shared Memory

CPU Load
.1.3.6.1.2.1.25.3.3 : CPU Load

For information, this is the what is discovered by PRTG :

For additionnal information, this is the complete return of the Linux command snmpwalk :

iso.3.6.1.2.1.1.1.0 = STRING: "Linux luminode 5.4.3 #1 SMP PREEMPT Mon Oct 19 11:07:56 CEST 2020 armv7l" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.8072.3.2.10 iso.3.6.1.2.1.1.3.0 = Timeticks: (1015443) 2:49:14.43 iso.3.6.1.2.1.1.5.0 = STRING: "luminode" iso.3.6.1.2.1.11.1.0 = Counter32: 6 iso.3.6.1.2.1.11.2.0 = Counter32: 6 iso.3.6.1.2.1.25.1.1.0 = Timeticks: (1016767) 2:49:27.67 iso.3.6.1.2.1.25.2.2.0 = INTEGER: 508540 iso.3.6.1.2.1.25.2.3.1.1.1 = INTEGER: 1 iso.3.6.1.2.1.25.2.3.1.1.3 = INTEGER: 3 iso.3.6.1.2.1.25.2.3.1.1.6 = INTEGER: 6 iso.3.6.1.2.1.25.2.3.1.1.7 = INTEGER: 7 iso.3.6.1.2.1.25.2.3.1.1.8 = INTEGER: 8 iso.3.6.1.2.1.25.2.3.1.2.1 = OID: iso.3.6.1.2.1.25.2.1.2 iso.3.6.1.2.1.25.2.3.1.2.3 = OID: iso.3.6.1.2.1.25.2.1.3 iso.3.6.1.2.1.25.2.3.1.2.6 = OID: iso.3.6.1.2.1.25.2.1.1 iso.3.6.1.2.1.25.2.3.1.2.7 = OID: iso.3.6.1.2.1.25.2.1.1 iso.3.6.1.2.1.25.2.3.1.2.8 = OID: iso.3.6.1.2.1.25.2.1.1 iso.3.6.1.2.1.25.2.3.1.3.1 = STRING: "Physical memory" iso.3.6.1.2.1.25.2.3.1.3.3 = STRING: "Virtual memory" iso.3.6.1.2.1.25.2.3.1.3.6 = STRING: "Memory buffers" iso.3.6.1.2.1.25.2.3.1.3.7 = STRING: "Cached memory" iso.3.6.1.2.1.25.2.3.1.3.8 = STRING: "Shared memory" iso.3.6.1.2.1.25.2.3.1.4.1 = INTEGER: 1024 iso.3.6.1.2.1.25.2.3.1.4.3 = INTEGER: 1024 iso.3.6.1.2.1.25.2.3.1.4.6 = INTEGER: 1024 iso.3.6.1.2.1.25.2.3.1.4.7 = INTEGER: 1024 iso.3.6.1.2.1.25.2.3.1.4.8 = INTEGER: 1024 iso.3.6.1.2.1.25.2.3.1.5.1 = INTEGER: 508540 iso.3.6.1.2.1.25.2.3.1.5.3 = INTEGER: 508540 iso.3.6.1.2.1.25.2.3.1.5.6 = INTEGER: 508540 iso.3.6.1.2.1.25.2.3.1.5.7 = INTEGER: 55608 iso.3.6.1.2.1.25.2.3.1.5.8 = INTEGER: 3932 iso.3.6.1.2.1.25.2.3.1.6.1 = INTEGER: 169204 iso.3.6.1.2.1.25.2.3.1.6.3 = INTEGER: 169204 iso.3.6.1.2.1.25.2.3.1.6.6 = INTEGER: 29696 iso.3.6.1.2.1.25.2.3.1.6.7 = INTEGER: 55608 iso.3.6.1.2.1.25.2.3.1.6.8 = INTEGER: 3932 iso.3.6.1.2.1.25.3.3.1.1.196608 = OID: ccitt.0 iso.3.6.1.2.1.25.3.3.1.1.196609 = OID: ccitt.0 iso.3.6.1.2.1.25.3.3.1.2.196608 = INTEGER: 3 iso.3.6.1.2.1.25.3.3.1.2.196609 = INTEGER: 1

• Related Articles

• SNMP / RMON on Gigacore switches

  Gigacore switches offer SNMP based on the RMON standard (RFC 1757) You can find detailed documentation on the standard here : https://oidref.com/1.3.6.1.2.1.16 That being said, it is usually automatically detected in major software like PRTG.

• LumiNode Advanced Networking

  In this article we will look at how to configure the network and advanced network options of the LumiNode. Firmware 2.3.0 or higher is required for these features. The interface has been redesigned in firmware 2.5.0. Note: It is not recommended to ...

• LumiNode API documentation

  In the attached document you can find all the web API commands available for the LumiNode and LumiCore. The API is also available on the device itself by browsing to http://{YOUR_DEVICE_IP}/api/doc To highlight a couple of applications that are ...

• LumiNode firmware upgrade

  In this document we will explain how to upgrade the firmware on the LumiNodes. There is only ONE firmware file for ALL the models which makes it easy to start with as there won't be any confusion about having the correct file. How to get the latest ...

• LumiNode / LumiCore patch generator

  LumiNode / LumiCore Patch Generator The LumiNode range offers the option to import csv files to fill the patch in a process engine. Attached to this article you will find an example excel spreadsheet with some handy macros to quickly make patches ...