LumiNode LED reference
Luminex LumiNode LED Reference
DMX Port LED States
|
LED |
State |
Description |
|
|
Solid Green |
DMX input idle |
|
|
Blinking Green |
Active DMX input detected |
|
|
Solid Cyan |
DMX output mode (DMX only), idle |
|
|
Blinking Cyan |
DMX output activity |
|
|
Solid Blue |
DMX + RDM output mode, idle |
|
|
Blinking Blue |
DMX + RDM activity |
|
|
Solid Red |
Source stream lost |
|
|
Blinking Red |
Stream lost, but node is still outputting the last received DMX packets |
|
|
Blinking Orange |
Source stream recovered |
|
|
Solid Magenta |
DMX redundancy configured, output idle |
|
|
Blinking Magenta |
DMX redundancy active/output active |
|
|
Heartbeat Cyan |
DMX Hold / Continuous mode active — output is still transmitting the last DMX values, but no new data is being received |
|
|
Heartbeat Blue |
DMX + RDM Hold mode active — last values held while output remains active |
|
|
Heartbeat Magenta |
Redundant output holding last valid DMX values |
Network Port LED States
Left
LED — Link / Speed
|
Icon |
State |
Description |
|
|
Solid Green |
Gigabit Ethernet link established |
|
|
Blinking Green |
Gigabit Ethernet traffic/activity |
|
|
Solid Orange |
100 Mbps Ethernet link established |
|
|
Blinking Orange |
100 Mbps Ethernet traffic/activity |
Right
LED — Status / Mode
|
Icon |
State |
Description |
|
|
Solid Blue |
Normal/default operation |
|
|
Blinking Green |
Device booting or Identify mode active |
|
|
Blinking Orange |
Firmware upgrade in progress |
|
|
Group/VLAN Colour |
Port assigned to a specific VLAN/group or Trunk |
Quick Troubleshooting Guide
|
LED Behaviour |
Interpretation |
|
Fast blinking output colour |
Live DMX data present |
|
Slow heartbeat pulse |
Output active but holding last values |
|
Solid red |
Stream/source lost |
|
Red blinking |
Source lost but output still transmitting held values |
|
Orange blinking |
Source recovered |
|
Blue solid on network port |
Device operating normally |
|
Green blinking on network port |
Boot or identify mode |
|
Orange blinking on network port |
Firmware update in progress |
Related Articles
LumiNode LED indicators
There are various LEDs on the LumiNode. Here is a list of the LEDs, the possible colours, and the meaning of each colour: DMX Port Status Meaning DMX Input Green Blinking: Active input DMX only (output mode) Cyan Blinking: DMX activity DMX + RDM ...GigaCore LED reference
Luminex GigaCore LED Reference System Status LEDs OK / General Status LED Icon State Description Solid Green System operating normally Blinking Green Writing to flash memory, do not power off Solid Orange Temperature warning Blinking Red Temperature ...LumiNode API documentation
In the attached document you can find all the web API commands available for the LumiNode and LumiCore. The API is also available on the device itself by browsing to http://{YOUR_DEVICE_IP}/api/doc To highlight a couple of applications that are ...LumiNode firmware upgrade
In this document we will explain how to upgrade the firmware on the LumiNodes. This can be done in two ways: using Araneo (recommended) or using the web interface of the LumiNode. Araneo Araneo allows upgrading multiple LumiNodes or LumiCores at the ...LumiNode / LumiCore patch generator
LumiNode / LumiCore Patch Generator The LumiNode range offers the option to import csv files to fill the patch in a process engine. Attached to this article you will find an example excel spreadsheet with some handy macros to quickly make patches ...