Gigacore 10 Rack mounting hardware
The Gigacore 10 comes with all the necessary rack mounting hardware.
But in case you misplaced these parts, we have put together this document with schematics and part numbers to help order new ones
Related Articles
Mounting the LumiNode
Depending on the model of the device there are different mounting options: LumiNode 4 LumiNode 4 is a device that can be mounted in a truss as well as in a rack. Please read the following instructions to make sure the device is mounted and secured ...
GigaCore Gen2 API documentation
In the attached document you can find all the web API commands available for the second generation GigaCore. The API is also available on the device itself by browsing to http://{YOUR_DEVICE_IP}/api/doc This API works for Gen2 GigaCore switches. All ...
GigaCore switches Fiber Optic cabling
This document will describe how to connect all your network devices via fiber optic and what to look out for on hardware level. SFP Technical Info In order to connect all the fiber links in the correct order we need to know which side of the SFP ...
Gigacore line - Noise level measurements @ 1m
GigaCore 26i Ambient Temperature Noise level @1m 0 – 30°C Max 22dBA 30 – 50°C Max 33dBA GigaCore 26i PoE PoE Total power consumption Ambient Temperature Noise level @1m <150 W 0 – 30°C Max 22dBA 30 – 40°C Max 33dBA <250 W 0 – ...
Gigacore Switches and Avid S6L
As most of you probably know by now, Gigacore switches can be used to connect the different units in an Avid S6L system. The procedure to configure Gigacore switches is described by Avid in this document : ...