Gigacore line - Noise level measurements @ 1m
GigaCore
26i
|
|
|
|
Ambient Temperature
|
Noise level @1m
|
|
0 – 30°C
|
Max 22dBA
|
|
30 – 50°C
|
Max 33dBA
|
GigaCore
26i PoE
|
|
|
PoE Total
power consumption
|
Ambient Temperature
|
Noise level @1m
|
<150 W
|
0 – 30°C
|
Max 22dBA
|
|
30 – 40°C
|
Max 33dBA
|
|
|
|
<250 W
|
0 – 40°C
|
Max 33dBA
|
|
|
|
>250W
|
0-30°C
|
Max 33dBA
|
|
30 – 40°C
|
Max 37dBA
|
GigaCore
10
|
|
|
|
Ambient Temperature
|
Noise level @1m
|
|
0 – 35°C
|
Max 18dBA
|
|
|
|
|
35 – 50°C
|
Max 24dBA
|
GigaCore
10 PoE
|
|
|
PoE Total
power consumption
|
Ambient Temperature
|
Noise level @1m
|
<80 W
|
0 – 35°C
|
Max 18dBA
|
|
35 – 40°C
|
Max 24dBA
|
|
|
|
>80W
|
0-30°C
|
Max 18dBA
|
|
30 – 40°C
|
Max 24dBA
|
GigaCore 12 PoE
|
|
|
|
Ambient Temperature
|
Noise level @1m
|
|
0 – 35°C
|
Max 30dBA
|
|
35 – 50°C
|
Max 39dBA
|
| GigaCore
14R
GigaCore 14R with PoE |
GigaCore 16Xt
GigaCore 16Xt PoE |
|
|
Ambient Temperature
|
Noise level @1m
|
|
0 – 35°C
|
Max 30dBA
|
|
35 – 50°C
|
Max 42dBA
|
GigaCore
RPSU 400
|
|
|
|
Ambient Temperature
|
Noise level @1m
|
|
0 – 50°C
|
Max 40dBA
|
| GigaCore
RPSU |
|
|
| |
Ambient Temperature |
Noise level @1m |
| |
0 – 50°C |
Max 38dBA
|
Related Articles
GigaCore Gen2 API documentation
In the attached document you can find all the web API commands available for the second generation GigaCore. The API is also available on the device itself by browsing to http://{YOUR_DEVICE_IP}/api/doc This API works for Gen2 GigaCore switches. All ...
Gigacore 10 Rack mounting hardware
The Gigacore 10 comes with all the necessary rack mounting hardware. But in case you misplaced these parts, we have put together this document with schematics and part numbers to help order new ones
GigaCore switches Fiber Optic cabling
This document will describe how to connect all your network devices via fiber optic and what to look out for on hardware level. SFP Technical Info In order to connect all the fiber links in the correct order we need to know which side of the SFP ...
AVB / Milan
GigaCore switches support AVB / Milan. In the current firmware versions (as of writing: GigaCore v1.4.1 of gen2 and GigaCore v3.1.0 for gen1), AVB is enabled by default on all ports. Enabling AVB on GigaCore To enable AVB on second generation ...
Gigacore Switches and Avid S6L
As most of you probably know by now, Gigacore switches can be used to connect the different units in an Avid S6L system. The procedure to configure Gigacore switches is described by Avid in this document : ...